Aercus WS3083 Installation Guide download pdf (Page 13)

WS3083

- 13 -

Indoor Humidity

Press the MENU key six times to select the INDOOR HUMIDITY section, the INDOOR HUMIDITY section digits

will start flashing. Press the UP or DOWN key to change the humidity high alarm (press ON/OFF to

enable/disable). If the alarm is enabled, an alarm symbol appears in the display.

Press the ENTER key to select the following modes, then press the UP or DOWN key to set the value:

 Indoor humidity low alarm (press ON/OFF to enable/disable). If the alarm is enabled, an alarm

symbol appears in the display.

 Maximum humidity (since last reset). Resetting the maximum indoor humidity value - when both

the indoor humidity value and MAX icon are flashing, hold the ENTER key for 3s, the maximum

indoor humidity value will be reset to the current reading.

 Minimum humidity (since last reset). Resetting the minimum indoor humidity value - when both

the indoor humidity value and MIN icon are flashing, hold the ENTER key for 3s, the minimum

indoor humidity value will be reset to the current reading.

Indoor Temperature

Press the MENU key seven times to select the INDOOR TEMPERATURE section, the INDOOR TEMPERATURE

section digits will start flashing. Press the UP or DOWN key to change the temperature unit between C and F.

Press the ENTER key to select the following modes:

 Indoor temperature high alarm (press ON/OFF to enable/disable). If the alarm is enabled, an

alarm symbol appears in the display.

 Indoor temperature low alarm (press ON/OFF to enable/disable). If the alarm is enabled, an alarm

symbol appears in the display.

 Maximum temperature (since last reset). Resetting the maximum indoor temperature value -

when both the indoor temperature value and MAX icon are flashing, hold the ENTER key for 3s, the

maximum indoor temperature value will be reset to the current reading.

 Minimum temperature (since last reset). Resetting the minimum indoor temperature value - when

both the indoor temperature value and MIN icon are flashing, hold the ENTER key for 3s, the

minimum indoor temperature value will be reset to current reading.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Aercus WS3083 Installation Guide Page 13